Introduction
A handful of almonds and a bar of chocolate can become a lovely homemade treat without turning the kitchen upside down. Chocolate bark with almonds takes just a few steps: melt, spread, sprinkle and chill.
At Country Life Foods, we like recipes that make good use of pantry staples. This one works with dark, milk or white chocolate, and you can keep it simple or add a little dried fruit or flaky salt. Start with chocolate you enjoy eating, use dry equipment, and give the bark time to firm up before breaking it into pieces.
What You Need for Almond Bark
Chocolate bark is a thin sheet of melted chocolate with toppings, broken into pieces once it sets. The pieces can be neat or a little rustic. Either way, they taste the same.
For the recipe below, you’ll need:
- 3/4 lb dark or semisweet chocolate, chopped if using a bar
- 3/4 cup roasted almonds, whole or roughly chopped
- A small pinch of flaky salt, optional
You’ll also need a baking sheet, parchment paper, a microwave-safe bowl and a dry spatula or spoon. Make a little room in the refrigerator for the baking sheet before you begin.
The recipe makes one sheet of bark. The number of pieces depends on how large you break them.
Choosing the chocolate
Dark chocolate gives the bark a deeper, less sweet flavor. Semisweet chocolate is a good middle ground, while milk chocolate makes a sweeter, creamier batch. Pick a chocolate you like on its own because its flavor will be front and center.
A chopped chocolate bar is a convenient choice for melting. Chocolate chips can work, too, although some chips hold their shape and may not melt as smoothly as a bar. Stir them well between short bursts of heat before deciding they need more time.
You may also see a product called “almond bark” in the baking aisle. That name can refer to a candy coating rather than chocolate with almonds mixed in. Check the package to see what you’re buying and follow its melting directions.
Choosing the almonds
Roasted almonds bring a toasty flavor and crunch. Unsalted almonds let you decide whether to add a pinch of salt on top. If your almonds are already salted, taste one first and consider skipping the extra salt.
Whole almonds make chunky pieces. Roughly chopped almonds spread more evenly, so there’s a little crunch in more bites. Sliced almonds work as well and make a thinner, more delicate topping.
This is a handy use for the nuts already in your pantry. Before you begin, taste one to make sure it still tastes fresh.
Pantry note: Chop the almonds if you want smaller pieces of bark that are easier to break and share.
Carob & Sweets
How to Make Chocolate Bark With Almonds
This is an untempered recipe, which means you don’t need to follow the precise heating and cooling process used for glossy candy. The refrigerator helps the bark firm up, and it’s best kept chilled.
1. Prepare the pan and almonds
Line a baking sheet with parchment paper. Roughly chop the almonds if you prefer smaller pieces, and set aside about one-third of them for the top.
If your almonds aren’t roasted, you can toast them first for a nuttier flavor. Spread whole almonds on a baking sheet and bake at 350°F for about 8 to 11 minutes, stirring partway through. Watch closely near the end and let them cool completely before adding them to the chocolate. Sliced almonds can toast faster, so check them early.
2. Melt the chocolate
Put the chopped chocolate in a completely dry, microwave-safe bowl. Microwave at 50% power for 20 to 30 seconds, then stir well. Continue heating in short intervals, stirring each time.
When most of the chocolate has melted, stop heating and stir until the remaining pieces melt. If needed, return it to the microwave briefly. Chocolate can scorch, so a little patience is worth it.
3. Add the almonds and spread
Stir about two-thirds of the almonds into the melted chocolate. Pour the mixture onto the parchment and spread it into an even layer, roughly 1/4 inch thick. It doesn’t need to fill the entire pan.
Sprinkle the remaining almonds over the top and press them lightly into the chocolate. Add a small pinch of flaky salt if you like.
4. Chill and break
Refrigerate the pan until the chocolate is firm, about 20 to 30 minutes. The time can vary with the thickness of the bark and your refrigerator.
Lift the bark off the parchment and break it into pieces. Store the pieces in an airtight container in the refrigerator. Separate layers with parchment if you’d like to keep them from rubbing together.
Important: Keep the bowl, spoon and toppings dry. A little water can make melted chocolate turn thick and grainy.
White Chocolate Bark With Almonds
For white chocolate bark with almonds, use the same recipe and replace the dark chocolate with 3/4 lb white chocolate. Keep the 3/4 cup of roasted almonds, and add a small pinch of salt if you want to balance the sweetness.
White chocolate has a sweet, creamy flavor that pairs especially well with toasted almonds. It can also be sensitive to overheating, so use 50% microwave power and shorter intervals. Stir thoroughly after each one, and stop heating while a few small pieces remain. The warmth in the bowl can melt them as you stir.
For a pretty contrast, press a little chopped dried cranberry or dried cherry into the top along with the almonds. Keep the fruit dry and use a light hand so the chocolate can hold the toppings in place.
Check the package if you want white chocolate rather than a white candy coating. White chocolate contains cocoa butter and milk ingredients. Products labeled as coatings may use a different blend of ingredients.
Make a two-chocolate swirl
For a marbled sheet, melt dark chocolate and white chocolate separately in dry bowls. Spread one chocolate on the parchment, then spoon small amounts of the other over it. Drag a toothpick gently through both chocolates a few times before adding the almonds.
Use a light touch. Too much swirling blends the colors together, although the bark will still be good to eat.
Make It Your Own With Pantry Staples
Once you have the basic recipe down, try one or two additions rather than piling on everything in the cupboard. Keep the chocolate layer visible so there’s enough to hold the toppings.
- Dried fruit: Add chopped dried cherries, cranberries or apricots for a chewy contrast. Replace some of the almonds with fruit, or scatter a little over the top.
- Seeds: Swap part of the almonds for roasted pumpkin seeds or sunflower seeds. Press them lightly into the melted chocolate.
- Coconut: Sprinkle a little toasted, unsweetened coconut over dark or white chocolate.
- Extra crunch: Add a few broken pretzels with the almonds. Check the pretzel label if you’re cooking for someone avoiding gluten.
Almonds, seeds and dried fruit are useful staples to keep on hand for both everyday snacks and small batches of bark. Choose amounts you expect to use while they’re fresh, and taste them before adding them to your chocolate.
For a sweeter batch, use milk or white chocolate and leave off the salt. For a less sweet flavor, choose dark chocolate and add just a few flakes of salt after spreading.
Why the Chocolate Matters for Texture
The simple recipe above doesn’t require tempering. It makes a good batch for keeping in the refrigerator and enjoying at home.
Tempering is a controlled process of heating and cooling chocolate. It helps chocolate set with a shinier finish and a firmer snap. Untempered chocolate can become soft at room temperature or develop a pale, dull appearance called bloom.
For a comparison of tempered and refrigerated untempered bark, see Nibble and Dine’s chocolate bark guide. If you’re making gifts that need to sit out, tempered chocolate or a candy coating prepared according to its package directions may be more convenient than the chilled version.
There’s no need to add coconut oil to this recipe. The chocolate and almonds are enough, and keeping the finished bark chilled helps it stay firm.
Troubleshooting Your Bark
A batch doesn’t have to look perfect to be worth eating. Here’s what to check if yours doesn’t turn out quite as expected.
The chocolate is thick or grainy
Water or too much heat may be the culprit. Next time, dry the bowl and spatula completely, use shorter microwave intervals and stir often. Don’t add water to thin chocolate intended for bark.
The toppings fall off
The chocolate may have started to set before the toppings went on. Have the almonds ready before melting, then sprinkle and press them into the chocolate while it’s still soft. Stirring some almonds into the chocolate also helps keep them in the finished pieces.
The bark is too soft
Give it more time in the refrigerator. If it softens again after sitting out, return it to its airtight container and keep it chilled. This is common with simply melted, untempered chocolate.
The pieces are hard to break
A thick sheet or whole almonds can make bark tougher to snap. Let the firm bark sit briefly, then use a sturdy knife to cut it into smaller pieces. For your next batch, spread the chocolate a little thinner or chop the almonds.
Storing and Sharing
Keep this untempered bark in an airtight container in the refrigerator for up to a week. For serving, take out the pieces you need and return the rest to the fridge. The bark may soften if it sits in a warm room.
If you’re packing it as a gift, layer pieces between parchment in a clean container. Let the recipient know it contains almonds and mention any other ingredients you’ve added. Because this version is best kept cool, it’s a better choice for a gift that can be refrigerated than one that will spend a long time in a warm car.
For anyone with dietary restrictions or allergies, check the labels on the chocolate and every topping. Milk and white chocolate contain milk ingredients, and dark chocolate labels vary. Use clean equipment and choose ingredients appropriate for the person you’re serving.
A Simple Treat to Make Again
A batch of almond bark can be as plain or as colorful as you like. Start with the basic recipe, then adjust the chocolate and toppings to suit your pantry.
- Choose dark, milk or white chocolate you enjoy eating.
- Use roasted almonds for a toasty crunch.
- Keep equipment dry and melt the chocolate gently.
- Chill the bark until firm, then store it in the refrigerator.
Bottom line: A little chocolate and a handful of almonds are enough to make a treat worth sharing.
For your next batch, take a look through your almonds, seeds and dried fruit before choosing a combination. One small addition can make the same recipe feel new.
FAQ
Can I use raw almonds in chocolate bark?
Yes. Raw almonds work, or you can toast them first for a deeper flavor and more crunch. Let toasted almonds cool completely before adding them to melted chocolate.
Can I make almond bark without a microwave?
Yes. Place the chocolate in a heatproof bowl over a pan of gently simmering water. Keep the bottom of the bowl above the water, stir gently and keep steam and splashes away from the chocolate.
Can I use chocolate chips instead of a chocolate bar?
Yes. Melt them gently and stir between short intervals. Some chips hold their shape as they warm, so stir before adding more heat.
How should I store homemade chocolate bark with almonds?
Store this untempered bark in an airtight container in the refrigerator for up to a week. Separate layers with parchment if desired, and keep it cool until serving.